BluAgent Electronic Logbook 3.0.2212.220905 - App Store

BluAgent Electronic Logbook version 3.0.2212.220905

Updated At: 2026-10-14

Changes: Version History Fixes o Fixes an issue where the Location is not updating [Related Issues: #10252, #10239, #10272, #10273, #10285, #10206, #10235] o Fixes the issue where the latest driverCalc last changed date keeps on updating every minute [Related Issues: #9820] o Fixes on eSignatures to be secured and locked [Related Issues: #9164] o Fixes an issue where the 'Cycle' is not resetting after 24 hours consecutive rest when using the exception: 'Oilfield Operations with 24-hour restart - 395.1(d)' [Related Issues: #9048, #9417] o Fixes an issue where the 'Repairs Unnecessary' column is empty on the portal> DVIR History page, if a reviewing driver marks the repairs as 'Repair not needed' or 'Repair needed' [Related Issues: #9125] o Fixes an issue where the DVIR report has an extra blank page [Related Issues: #9123] o Fixes an issue where a driver cannot complete a DVIR [Related Issues: #5571] o Fixes VBUS data processing issues [Related Issues: #9376] o Fixes an issue where the DVIR button is not appearing for current vehicle in certain cases [Related Issues: #7425] o Fixes an issue where the app crashes while certifying DVIR using Android 7.1.1 device [Related Issues: #9875, #9850, #10147] o Fixes an issue where the edits from the portal> Logs page does not automatically sync on the application o Main Dashboard screen ▪ Fixes an issue where Break Time is not counting down correctly [Related Issues: #9614, #9727, #9957] o Change Operating Zone and Cycle dialog ▪ Fixes an issue where previously selected cycles are being grayed out [Related Issues: #9720] o USA Regulations ▪ Edit Logs screen • Removal of Deactivate button when editing an event ▪ FMCSA ELD CSV Output File • Fixes an issue where Engine Hours values are incorrect • Fixes an issue where ECU provided VIN was not overriding manual configured VIN • Fixes an issue where power events recorded during Unidentified Driving are being recorded under the Unidentified Driver Profile Records segment when it should be under the CMV Engine Power-Up and Shut Down Activity segment • Fixes the issue where the drivers have consecutive Login events without accompanying Logout events [Related Issues: #3337] • Fixes an issue where a positioning compliance malfunction has not been set when the missing coordinates data (lat, lon) is replaced by 'E's 3.0.2212.220905 11/02/2022 • Fixes o Fixes an issue where the Location is not updating [Related Issues: #10252, #10239, #10272, #10273, #10285, #10206, #10235] o Fixes the issue where the latest driverCalc last changed date keeps on updating every minute [Related Issues: #9820] o Change Operating Zone and Cycle dialog ▪ Fixes an issue where previously selected cycles are being grayed out [Related Issues: #9720] o USA Regulations ▪ Edit Logs screen • Removal of Deactivate button when editing an event ▪ FMCSA ELD CSV Output File • Fixes an issue where Engine Hours values are incorrect • Fixes an issue where ECU provided VIN was not overriding manual configured VIN • Fixes an issue where power events recorded during Unidentified Driving are being recorded under the Unidentified Driver Profile Records segment when it should be under the CMV Engine Power-Up and Shut Down Activity segment • Fixes the issue where the drivers have consecutive Login events without accompanying Logout events [Related Issues: #3337] • Fixes an issue where a positioning compliance malfunction has not been set when the missing coordinates data (lat, lon) is replaced by 'E's 3.0.2212.220822 09/19/2022 New Features DVIR Requiring the driver to enter a location before submitting the DVIR if location field is still empty Fixes Fixes the issue on Annotate Incorrect Driving where inaccurate end time is being indicated while attempting to exclude a driving event with less 1 minute length Fixes an issue where the Syncing Account Data dialog starts at 0/14 instead of 1/13 Fixes an issue where the Log Dates are not translated to French Fixes an issue where inserting past status reaching 12 AM affects the next days first event Fixes an issue where the log dates are not translated to French DVIR screen Fixes an issue where the displayed Odometer value in View Summary screen is different from the entered Odometer Roadside Inspection screen Data Transfer Renaming the Comment label to Safety Official/Investigation Code and Comment placeholder to Enter investigation code here Canada Regulations Fixes an issue where the CCMTA ELD CSV Output Filename is incorrect USA Regulations Fixes an issue where edited events are missing required Edit Reasons or Other annotations in FMCSA ELD CSV Output File Fixes an issue where Geometris Connection is failing The addition of this fix covers SOME vehicles (pre-2008 may have different issues that are still being investigated.) Fixes the issue where the latest driverCalc last changed date keeps on updating every minute 3.0.2205.220314 06/22/2022 New Features Recording of Data Transfer Malfunction if the app FMCSA Data Transfer fails due to an incorrect registration values Recording of AOBRD remark in the Data Transfer ELD CSV Output File to any status performed while in AOBRD Mode DVIR Inspect Areas screen Addition of a unit label on the Elapsed Time Canada Regulations Prompting the driver with the Certify Log YYYY-MM-DD dialog to recertify logs when the driver added/edited an event on a log that was previously certified Addition of Will Pair SB option in Settings HOS and Time Remaining dialog. Once enabled, ‘Will Pair Sleeper Berth’ dialog will be displayed stating: “You are enabling the option to pair Sleeper Berth segments. You will be in Violation if you do not follow the requirements for Splitting Sleeper Berth. Do you wish to continue? with Yes and No buttons If the driver selects Yes the driver is not allowed to indicate deferral of daily Off-duty time If the driver selects No, the driver is allowed to indicate deferral of daily Off-duty time Requiring of an annotation of at least 4 characters for every driver's edit or change of duty status. When a driver is editing an event by changing the duty status, the previous annotation should be cleared and require the driver to enter a new annotation as well as reason for the change. 3.0.2201.220124 03/02/2022 Bug Fixes 2120.211122 12/04/2021 Bug fixes 2114.210816 08/31/2021 Bug Fixes v2022.201207 07/18/2021 Bug Fixes 2110.210628 07/01/2021 Bug Fixes 2110.210614 06/22/2021 Bug Fixes 2026.210310 04/13/2021 Addition of a Warning dialog stating: "According to our records you have not met the necessary qualifications to change your cycle. Changing to a new cycle without meeting the mandatory off duty time requirements may result in hours-of-service violations." when the driver attempts to change his/her cycle without performing the required cycle reset o Data Transfer 2026.210224 03/09/2021 Addition of a Warning dialog stating: "According to our records you have not met the necessary qualifications to change your cycle. Changing to a new cycle without meeting the mandatory off duty time requirements may result in hours-of-service violations." when the driver attempts to change his/her cycle without performing the required cycle reset o Data Transfer ▪ Days with no events in the corresponding RODS are now included in the driver’s RODS with an Off Duty event 2024.210126 02/17/2021 Release with fixes and better app performance 2022.201222 12/30/2020 Bug Fixes 2020.201004 10/24/2020 Renaming the exception name "No Logs" to "No logs for drivers operating within 160km of home terminal - Section 81" on Edit Logs screen, Roadside Inspection screen and Certified Driver’s Daily Log PDF 2020.200727 08/05/2020 Fixes an issue where the FMCSA data transfer is reusing sequence numbers ○ Fixes the issue where the app fails to record a Timing Malfunction on some VBUS devices ○ Fixes an issue where the app creates an Unidentified Driving event when there is a Bluetooth disconnection 2020.200323 04/22/2020 Not overriding the VIN of a vehicle if a VIN Mismatch is detected ○ French Translation for Certified logs and DVIR PDF ○ Addition of Remark when a co-driver logs out 1911.190828 08/30/2019 Fixes on the Vehicle ELD configuration where it is not being set/updated when connecting to same VBUS device type but different VBUS device ○ Fixes on the missing VIN within the DVIR report ○ Fixes on app crashes upon tapping the Clear button in the Switch Equipment dialog 1905.190612 06/19/2019 Vehicles/Trailers Management screen ■ Allow up to 20 characters on the name field when creating/editing a vehicle equipment type ■Requiring note field when changing Status to Personal Use or Yard Moves ■Showing only the ‘VBUS Connected/Disconnected’ Remark events when the ‘Show all events” option is TOGGLED ON in the Edit Logs screen 1905.190529 06/04/2019 DVIR screen ● Changing the severity level of the defects from High to Major and Medium/Low to Minor ■ Edit Logs screen ● Added events while in Agricultural Operations exception will be considered as OffDuty ● Addition of Start Break button within the “Change Current Status” dialog 1905.190430 05/07/2019 Hiding the ‘Fuel Receipt’ tab on mobile app, if State Mileage option is disabled on the portal for the driver's account ○ Driver Logs Drawer ■ Removal of Shipments and Miles buttons ○ Changing the description of ‘30 Minute Break Exemption for Short-haul Drivers - 395.1(e)(1)’ to ‘30 Minute Break Exemption for Short-haul Drivers (14 hour shift) - 395.1(e)(1)’ ○ DVIR screen ■ Ability to search specific DVIR item/area from the list upon doing an inspection ○ Improvements on the Upgrade Messages 1905.190415 04/24/2019 Improvements on the Upgrade Messages ■ Ability to alert drivers when a new version is available or the app is no longer supported by prompting a dialog on the application ○ Send notification email when a driver has attached a trailer but not performed any inspection (Note: To trigger the notification email, the ‘Pre-Trip DVIR’ alert should be enabled in the portal> Settings> Alerts page ■ If the driver switch/select vehicle then went to driving without performing pre-trip DVIR, it will send a notification email to the intended recipient for the driver not able to perform the inspection ■ If the driver switches/selects a vehicle and trailer then went to driving without performing a pre-trip DVIR, it will send a notification email to the intended recipient for the driver not able to perform the inspection ■ If a new trailer is selected/switched/inserted even if vehicle is already inspected, a notification email or SMS will be sent to the intended recipient if the driver went to driving without performing a pre-trip inspection for the newly added trailer ○ Changes to the following remark events when selecting and removing a trailer: ■ When attaching a trailer the remark will be displayed as "Attached trailer ■ When removing a trailer the remark will displayed as "Detached trailer ○ Settings screen ■ Addition of Certificate of Compliance to the application ○ Addition of 10 hours Sleeper option to the list of Break Timer options when in USA region ○ Displaying all Remarks on the ELD CSV Output File and FMCSA site ○ Support logout drivers from multiple devices ○ Prompting a message on the application when a driver is deactivated or an account is deactivated and a login is attempted on the app ○ Limiting manual entry of location description by the driver to 5-60 characters based on ELD regulations - 4.8.2.1.5 ○ Create/Edit Event dialog ■ Changing the error message from "Reason must contain at least 4 characters" to "Select or enter a reason for this edit" upon editing an event ○ Fuel Receipts and Documents screen ■ Reducing the captured image/photo resolution ○ Equipment Management Screen ■ Addition of " Requires VBUS connection for driving" checkbox within the Create/Edit Equipment dialog 1905.190403 04/05/2019 What’s New ■ Not displaying the inactive equipment on the application ○ Fixes ■ Fix an issue where the ‘Authorized for Personal Use and Authorize for Yard Moves’ toast message is being prompted multiple times after successful vbus connection ■ Fix an issue on the grid chart is not handling the daylight saving time correctly ■ Fix an issue on the Time Remaining dialog where the workshift shows 24 hrs instead of 15 hrs when using Alberta cycle ■ Fix an issue where 8 hr cycle reset line and remark is being recorded when using Alberta cycle ■ Edit Logs screen ● Fix an issue where the grand total hour in the grid chart is incorrect 1824.190228 03/06/2019 ■ DVIR screen ● Moving the “Pass all” button at the right side of the DVIR Form name instead of per area ● Making the Finish button visible all the time and have the DVIR areas scrollable through out ■ Certified Driver’s Daily Log PDF & Roadside Inspection screen ■ Displaying “Notes” column when using Canadian ruleset regardless of the regulation mode 1824.190131 02/11/2019 Addition of the following options in the portal> Drivers Management page to control the drivers permission on managing the equipment in the application: ▪ Vehicle ● Add option ● Edit option ● Delete option ▪ Trailer ● Add option ● Edit option ● Delete option 1824.190118 01/18/2019

BluAgent Electronic Logbook version 3.0.2212.220905

Updated At: 2022-11-02

Changes: Nov 2, 2022 Version 3.0.2212.220905 Fixes o Fixes an issue where the Location is not updating [Related Issues: #10252, #10239, #10272, #10273, #10285, #10206, #10235] o Fixes the issue where the latest driverCalc last changed date keeps on updating every minute [Related Issues: #9820] o Fixes on eSignatures to be secured and locked [Related Issues: #9164] o Fixes an issue where the 'Cycle' is not resetting after 24 hours consecutive rest when using the exception: 'Oilfield Operations with 24-hour restart - 395.1(d)' [Related Issues: #9048, #9417] o Fixes an issue where the 'Repairs Unnecessary' column is empty on the portal> DVIR History page, if a reviewing driver marks the repairs as 'Repair not needed' or 'Repair needed' [Related Issues: #9125] o Fixes an issue where the DVIR report has an extra blank page [Related Issues: #9123] o Fixes an issue where a driver cannot complete a DVIR [Related Issues: #5571] o Fixes VBUS data processing issues [Related Issues: #9376] o Fixes an issue where the DVIR button is not appearing for current vehicle in certain cases [Related Issues: #7425] o Fixes an issue where the app crashes while certifying DVIR using Android 7.1.1 device [Related Issues: #9875, #9850, #10147] o Fixes an issue where the edits from the portal> Logs page does not automatically sync on the application o Main Dashboard screen ▪ Fixes an issue where Break Time is not counting down correctly [Related Issues: #9614, #9727, #9957] o Change Operating Zone and Cycle dialog ▪ Fixes an issue where previously selected cycles are being grayed out [Related Issues: #9720] o USA Regulations ▪ Edit Logs screen • Removal of Deactivate button when editing an event ▪ FMCSA ELD CSV Output File • Fixes an issue where Engine Hours values are incorrect • Fixes an issue where ECU provided VIN was not overriding manual configured VIN • Fixes an issue where power events recorded during Unidentified Driving are being recorded under the Unidentified Driver Profile Records segment when it should be under the CMV Engine Power-Up and Shut Down Activity segment • Fixes the issue where the drivers have consecutive Login events without accompanying Logout events [Related Issues: #3337] • Fixes an issue where a positioning compliance malfunction has not been set when the missing coordinates data (lat, lon) is replaced by 'E's

BluAgent Electronic Logbook version 3.0.2212.220905

Updated At: 2022-11-02

Changes: Fixes o Fixes an issue where the Location is not updating [Related Issues: #10252, #10239, #10272, #10273, #10285, #10206, #10235] o Fixes the issue where the latest driverCalc last changed date keeps on updating every minute [Related Issues: #9820] o Fixes on eSignatures to be secured and locked [Related Issues: #9164] o Fixes an issue where the 'Cycle' is not resetting after 24 hours consecutive rest when using the exception: 'Oilfield Operations with 24-hour restart - 395.1(d)' [Related Issues: #9048, #9417] o Fixes an issue where the 'Repairs Unnecessary' column is empty on the portal> DVIR History page, if a reviewing driver marks the repairs as 'Repair not needed' or 'Repair needed' [Related Issues: #9125] o Fixes an issue where the DVIR report has an extra blank page [Related Issues: #9123] o Fixes an issue where a driver cannot complete a DVIR [Related Issues: #5571] o Fixes VBUS data processing issues [Related Issues: #9376] o Fixes an issue where the DVIR button is not appearing for current vehicle in certain cases [Related Issues: #7425] o Fixes an issue where the app crashes while certifying DVIR using Android 7.1.1 device [Related Issues: #9875, #9850, #10147] o Fixes an issue where the edits from the portal> Logs page does not automatically sync on the application o Main Dashboard screen ▪ Fixes an issue where Break Time is not counting down correctly [Related Issues: #9614, #9727, #9957] o Change Operating Zone and Cycle dialog ▪ Fixes an issue where previously selected cycles are being grayed out [Related Issues: #9720] o USA Regulations ▪ Edit Logs screen • Removal of Deactivate button when editing an event ▪ FMCSA ELD CSV Output File • Fixes an issue where Engine Hours values are incorrect • Fixes an issue where ECU provided VIN was not overriding manual configured VIN • Fixes an issue where power events recorded during Unidentified Driving are being recorded under the Unidentified Driver Profile Records segment when it should be under the CMV Engine Power-Up and Shut Down Activity segment • Fixes the issue where the drivers have consecutive Login events without accompanying Logout events [Related Issues: #3337] • Fixes an issue where a positioning compliance malfunction has not been set when the missing coordinates data (lat, lon) is replaced by 'E's